[Mac Plus, RASCSI] How do I boot the OS from a virtual hard drive on RASCSI without a working Mac?

vorg

Tinkerer
Sep 3, 2022
69
61
18
[I hope this is the correct sub forum]

Hi all,

If you've seen my posts, you'll know I have a Mac Plus 1mb I'd like to get working. The floppy drive seems busted. In the meantime, I got a RASCSI in hopes of running the OS off of it.

Unfortunately every guide I've found to boot from it require you start with a working floppy drive and copying the system disk to the RASCI virtual hard drive.

Is there a way to just load a virtual hard drive with a working OS already on it without having to create the image myself?

Any help is appreciated.

Thanks!
 

wottle

Active Tinkerer
Oct 30, 2021
519
272
63
47
Fort Mill, SC
You should just download a pre-made image (like the 6.0.8 boot disk found here: (Edit - removed my link - see @eric 's official location below. )

Upload that to your RaSCSI (after unzipping it), mount it, and when you boot you Mac Plus with the 6.0.8 40MB drive mounted and attached, it should boot from SCSI.
 
Last edited:

vorg

Tinkerer
Sep 3, 2022
69
61
18
Eric and Wottle; thanks a million!

14511B66-8A20-4748-B2A2-464655F7F060.jpeg