Macintosh II PSU RIFA Cap Class? (ASTEC AA13780)

BeniD82

New Tinkerer
Sep 22, 2024
6
8
3
Virginia, USA
Hi There,

Currently working on restoring a Macintosh II system and would need some help with identification of some RIFA caps that are on the PSU. There are three 0.1 uF caps that are of the type that like to burn up. These have not cracked yet thankfully but I don't really want to push my luck. Unfortunately there's nothing that indicates whether those are X or Y type safety caps. Haven't really been able to find any thing about them online either unfortunately. There is also a larger 0.022 uF RIFA near the transformer and that one's clearly noted as a Y cap (which has completely cracked across its entire length so glad I didn't turn the PSU on before checking). Pics of the caps in question have been attached. Appreciate any input, thanks!
 

Attachments

  • Rifa1.jpg
    Rifa1.jpg
    91.3 KB · Views: 14
  • Rifa2.jpg
    Rifa2.jpg
    124.1 KB · Views: 15

Elemenoh

Active Tinkerer
Oct 18, 2021
382
373
63
Bay Area
I'll take a shot at answering but get a second source since I'm not an expert and safety is a factor.

An X capacitor is meant to be used line-to-line (i.e. between live and neutral) and is designed to fail short. If one fails, your fuse or circuit breaker would pop, preventing risk of shock.

A Y capacitor is meant to be used line-to-ground (i.e. between neutral and ground) and is designed to fail open. If one fails, the filtering will be compromised but there won't be a risk of shock.

That being said, what you have there is a 'precision capacitor' not an X or Y rated 'interference suppressor capacitor'. But I'm not familiar of why one would be chosen over the other for this application.

The data sheet for this specific cap is below. I think you'd be fine to replace it with a similarly rated polyester film capacitor. Just check the specs and make sure you get one with the right lead spacing. And again, getting a second opinion from someone who knows what they're talking about would be good. Perhaps cross-post to some place like eevblog forums.

Page 1.png
Page 2.png
Page 3.png