Hello all,
51 year old guy from the Trondheim area of Norway here. Been tinkering with computers since my late teens when I first could afford it. Macs have been the default choice - with all the pros and cons - since then, and even more so after a couple of 3-5 year stints working on Windows... I'm also faffing around with some Arduino and Raspberry Pi stuff when I can. Worked about 20 years in various IT functions, as well as some sound engineering, radio production and suchlike.
I've recently started my own boat service company that I try to get off the ground, as a completely logical and natural extension to my former IT work. That has to do with the fact that I have also tinkered with all sorts of motorized mayhem since I was a kid and since my interest in boats has been growing as of late I figured I'd give it a go. I primarily focus on outboard engines (not so different from any other engine) and 12/24V boat electrics, but also some fiberglassing and light interior woodwork.
My current little computer related headache is to get my PowerMac G4 450 Cube up and running with Adélie Linux. I ran head first in to the graphics wall that is ATI Rage 128 Pro, but I happened to have an nVIDIA GeForce mx card from a desktop PMG4 laying around so I fitted that. First hurdle done. Now I am stuck at "Setting keyboard mode (UTF-8) [ok]"... on the install cd boot, with no prompt or anything. If I try the live boot I get to roughly the same place in the boot process - I say "roughly" because the screen just goes... black.
Hmm... I'm probably missing some tiny detail somewhere...
51 year old guy from the Trondheim area of Norway here. Been tinkering with computers since my late teens when I first could afford it. Macs have been the default choice - with all the pros and cons - since then, and even more so after a couple of 3-5 year stints working on Windows... I'm also faffing around with some Arduino and Raspberry Pi stuff when I can. Worked about 20 years in various IT functions, as well as some sound engineering, radio production and suchlike.
I've recently started my own boat service company that I try to get off the ground, as a completely logical and natural extension to my former IT work. That has to do with the fact that I have also tinkered with all sorts of motorized mayhem since I was a kid and since my interest in boats has been growing as of late I figured I'd give it a go. I primarily focus on outboard engines (not so different from any other engine) and 12/24V boat electrics, but also some fiberglassing and light interior woodwork.
My current little computer related headache is to get my PowerMac G4 450 Cube up and running with Adélie Linux. I ran head first in to the graphics wall that is ATI Rage 128 Pro, but I happened to have an nVIDIA GeForce mx card from a desktop PMG4 laying around so I fitted that. First hurdle done. Now I am stuck at "Setting keyboard mode (UTF-8) [ok]"... on the install cd boot, with no prompt or anything. If I try the live boot I get to roughly the same place in the boot process - I say "roughly" because the screen just goes... black.
Hmm... I'm probably missing some tiny detail somewhere...