Latest activity
-
MMarconelly replied to the thread SE/30 with abnormal screen.Before you do anything else, I'd say just clean all the IC pins with alcohol, using a soft toothbrush. You can do that fairly quickly...
-
Kai Robinson replied to the thread Can se/30 flyback be replaced by a 157-026C flyback?.Just a word of warning - I purchased a flyback from Dalbani a few years ago - while it looked new, all the internal windings were... -
DDuke09 replied to the thread SE/30 RTC issues.I haven’t really touched it since, so haven’t tried replacing those yet.
-
CClassicHasClass replied to the thread Setting up Internet Networking on a BlueSCSI v2 Pico W External Plugged into a PoweMac 6500/300 with Mac OS 9.1.I don't have an answer to your question, just drooling over the 300MHz. My own 6500 is 275MHz, though it has a 1MB cache and a CS2...
-
CClassicHasClass replied to the thread PowerMac 7100 and Linux.Is that *actual* Open Firmware, or a stub designed to present a faked-up OF device tree? If the latter, this originally existed as part...
-
JDW replied to the thread Can se/30 flyback be replaced by a 157-026C flyback?.Wow. Those little guys have gotten nightmarishly expensive: https://www.ebay.com/itm/121655780759 $150 👀 -
-
Jjoevt replied to the thread PowerMac 7100 and Linux.Apple did make a Open Firmware for NuBus Power Macs. It's part of the Copland boot process. It is loaded by System 7.5 and uses some...
-
GGerrySch posted the thread Setting up Internet Networking on a BlueSCSI v2 Pico W External Plugged into a PoweMac 6500/300 with Mac OS 9.1 in Add-ons, Peripherals & Networking.Whew, long title. But is scopes out the issue. I bought a refurbished PowerMac 6500/300 at the VCF Southwest here in Dallas. It has...
-
Jjoevt replied to the thread SOLVED Apple //e with PAL composite video displaying issue.Congrats on solving the problem! The LS166 did appear to be shifting bits correctly - all characters being displayed had all bits...
-
-
wottle replied to the thread MacEffects Appreciation Post.Yeah, @tom_B has a much better understanding of the process than me. But much like I fumbled my way through the PCB design process, I...
