Latest activity
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).That is not the adaptor. The red and grey posts are just classic 8mm style reel hubs. You need to attached this over the red post: -
-
PP-car replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).My Kodak Reels arrived today with the red adapter attached to the left arm and the grey one attached to the right arm. However, my super...
-
-
PP-car replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).so, I just got my Kodak Reels and was able to get OdanO's firmware up and running. However, when I try to use the "framing" buttons...
-
Jjoevt replied to the thread Viability Of Transplanting A PowerMac B&W REV. B's Fixed IDE Controller Onto A REV. A Board?.B&W G3 Yosemite REV C schematics at: https://www.macdat.net/repair/apple_schematics.html The pages are not in order and it's not OCR'd...
-
Kai Robinson replied to the thread Viability Of Transplanting A PowerMac B&W REV. B's Fixed IDE Controller Onto A REV. A Board?.@XodiumLabs has done this, the CMD 642 is a direct pin compatible replacement. -
chasnah posted the thread Viability Of Transplanting A PowerMac B&W REV. B's Fixed IDE Controller Onto A REV. A Board? in PowerMac G3 & iMac G3.I previously acquired a PowerMac G3 Blue & White system that had a dead mainboard, only gives 4 beeps on startup indicating something's... -
-
PP-car replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).I think the unit NEEDS the 12mm lens I order to be considered a "viable" scanning option.
-
0dan0 replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Now for something not really firmware related, sensor read-out noise. Turns out the Reels has a lot of it. Any double-Es out there...
-
