Latest activity
-
Kai Robinson replied to the thread Ram 30-pin SIMM socket where to buy?.Someone moved the decimal place! :oops: -
Zhinü replied to the thread Ram 30-pin SIMM socket where to buy?.If anyone is curious, the ram sockets are now 38.40 per. Someone better get rich fast so they can bankroll new slots. Luckily the... -
-
AArjenCNX replied to the thread Horizontal lines on SE/30 Display.yeah, that solidly excludes that option indeed, just considering the way it works, it would be possible that there is a soldering issue...
-
Trash80toG4 posted the thread Page Buffer Capture from Radius FPD/SE VRAM Input - First baby step to cloning Card in Hardware.Some folks have been wondering about what I've been posting in another thread I've been using as a Development Notebook, so here goes... -
-
Mmmaseda replied to the thread Horizontal lines on SE/30 Display.Thanks but that isn’t the problem. I can recreate this problem on multiple computers each with a different logic board. At this point...
-
AArjenCNX replied to the thread Horizontal lines on SE/30 Display.Video ram comes to mind here, check the Vram chips and make sure there is no capacitor spillage around them, and that the Vias are OK, a...
-
AArjenCNX replied to the thread Sony MFD-75W repair - hitting a wall.the mechanism needs to be pristinely clean and smooth, a manual eject should almost shoot the disk out, if you don't get that, there is...
-
eric replied to the thread BlueSCSI v2 Pico - Low cost, open hardware, fast SCSI device!.Also a bit of an announcement I'm going to stop doing order fulfillment (since BlueSCSI sellers do a great job of it) to focus full...
-
eric replied to the thread BlueSCSI v2 Pico - Low cost, open hardware, fast SCSI device!.Just FYI front panels with full featured web interface and controls is now available...
-
eric replied to the thread Announcing BlueSCSI Toolbox – Web Edition.BlueSCSI Front Panel (same as the PicoIDE front panel) is now available from @jcm-1 and flamelilly(derek) (soon)...
-
CHello, I have a Macintosh 128k which has some RAM related fault. With all the original RAM, it starts up with a sad mac code of...
-
Trash80toG4 replied to the thread Hardware/software you have that no one talks about..Amen to that. Had a run in with one of the know it all "Consultants" that ran NYMUG back in that day. When I said QuickShare's SCSI...
