Latest activity
-
Elemenoh replied to the thread Outbound Laptop Capacitor List & Repair Log.I got the original PrairieTek 20MB hard drive imaged. Here's the recipe I used. Beige G3 desktop Mac with a USB card installed USB hard... -
-
Ffred1212 replied to the thread Running a Mac Plus logic board on an SE analog board/PSU — anyone done this?.Nice work I've thought about doing this in the past
-
LlitriSE replied to the thread Running a Mac Plus logic board on an SE analog board/PSU — anyone done this?.Update: found the actual mismatch, working on a fix. Scoped VSYNC directly at the connector on both boards for a real apples-to-apples...
-
Certificate of Excellence replied to the thread What printers are you using?.HP ENVY Photo 7858 - This is my current network printer. It usually is in my wife’s office as NP until I finish refurbing my 8625 which...
-
john-in-laguna replied to the thread Hacking the Kodak Reels 8mm Film Digitizer (New Thread).Hello Mike, I have a similar serial number (J2925148BK00441) and am using the latest D WIP firmware from melw and it is a definite... -
David Cook replied to the thread Expansion Memory Cards and Speed Limitations above 5MB on the Macintosh Portable.Awesome! -
Ccampbellashe replied to the thread Expansion Memory Cards and Speed Limitations above 5MB on the Macintosh Portable.I'm working on my version 3 board already; will integrate what I learned from version 2 and will include a jumper for the two Mac...
-
David Cook replied to the thread Expansion Memory Cards and Speed Limitations above 5MB on the Macintosh Portable.@campbellashe Do you have a M5126 backlit Portable? I think you'll want to add a 7MB jumper option, as that model has an address...
-
eric replied to the thread Announcing BlueSCSI Toolbox – Web Edition.ahh now I get what you're asking - and yes since it's all opensource I hope someone in the community can build some "headless" or...
-
JJAG replied to the thread Announcing BlueSCSI Toolbox – Web Edition.Most old Macs do not have external 3.5" drive bays to install this into. I suppose you could just leave it in the enclosure with the...
