Search results

Ahh thats not the case here with the interrupt switch.. It either bombs or I get the white dialog box the the > sign... Assuming thats Microbug. its been over 30 years since I used that and I had the MacsBug extension I believe. So your custom SCSI emulator is behaving the same way as my...

So you are seeing the same issue with a standard SCSI drive? If I put it to sleep, then hit a key to wake, then double click a folder to freeze, then hit the interrupt the machine locks up and i lose the mouse. Does the OS version matter ? I tried both on system 6.0.8 when i can get the debugger...

wow interesting so you are seeing the same issue. Is it the BlueSCSI? I just made a RAM disk and woke from sleep and tried to launch an app from the RAM disk and it behaved the same way with the delay.

I have your hybrid board on the logic board. I hope THATs not it! 😂 • SuperSVGA hybrid • Androda BlueSCSI adapter • Androda Desktop BlueSCSI system 6.0.8 and system 7.5.3 tested. For now I am preventing sleep altogether with After Dark screen saver.

Yeas I am using that

I just did a test with System 7.5.3 and when I go to the Control Strip and select “spin down hard drive” I see the BlueSCSI powers down. I then double clicked a folder and the BlueSCSI powers back up and I get the “watch” busy cursor but I have to wait 3 minutes for BlueSCSI activity.

Interesting you see no pattern. Maybe I have an isolated issue then. Mines the latest v2 version. What does it do when you wake it up from sleep and cause disk activity by opening a folder, menu item, app etc? Mine is not crashing it just takes several minutes to wake up.

I have the macintosh portable adapter and the desktop BlueSCSI working well on my portable but when I wake the computer from sleep the BlueSCSI takes several minutes to “spin up” and start working to the point it is faster just to hit reset and reboot the machine. is this a known issue and is...

That silicone tubing worked but the inner diameter is a little too big so i had to put a dab of superglue in the shaft to hold them in place but it so far its working good.

Cut the board out so there’s only the pins leftw then cover it in flux and solder and extract each pin like a dentist.

Oh wow ok I was wondering. That’s where all the horrible corrosion is and I’ve had to patch a bunch of traces

Hello all who might be interested in this sort of thing, I finished going over this pretty bad board, I fixed all the broken traces I have found so far and re-capped the board. I finally got the power button to kick the power supply on so the power circuit is now working. I rigged a bench...

sounds good. Yeah I’m on the hunt for a LCD display. I tried to fix mine that had a couple missing single pixel rows and I swapped some driver chips and it got worse. I think the contacts on the glass just deteriorate over time and there’s nothing you can do about it. Need someone to manufacture...

He has 3 feet for $9 I ordered some. If you want to wait I’ll send you a strip of it along with some TPU feet. Or if you don’t want to wait you can order some and send me your address and I’ll ship you some feet. I’ll print a batch now.

Well the slightest little imperfection and they don’t roll. So this might not be a good option. I’m going to try some of this: https://www.ebay.com/itm/295763912403?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=3sRbM8MHTG6&sssrc=4429486&ssuid=vQ425jH5TBq&var=&widget_ver=artemis&media=COPY

the feet came out good and the rollers are looking very promising. A few more iterations and I’ll be testing them out.

if you need or want any 3d printed parts let me know I’m going to try to make some new trackball rollers today out of TPU…

Congrats. I also Just got my BlueSCSI, adapter and ram upgrade and finally finished my repair / restoration from a dirty old non working junker I got off eBay. all finished aside from my display I tried to fix and made even worse 😭 😂 • corrosion clean , cap kit, hybrid board, ram upgrade and...

Any insight on who is behind the “New Hybrid Replacement for Macintosh Portable with Headers Rev 1.4” on eBay sold by “supersvga”? I wasn’t familiar with this one when I did my repair and ended up using the one on eBay. Seems to be working ok… I hope.. but doesn’t not look like a reverse...

I think I’m willing. I just haven’t found the way yet. I’ve done it before to other LCD panels with that EL sheet stuff.