Search results

Sounds good. Let me know. I don't have any generic 15v resin cases, and JLC3DP prices have gone up a bit. I can 3d print one myself, or get you a quote for a resin one to match your other. I also just realized I have no more 15/20v usb-c trigger boards, so I'd need to order some more of...

My initial “universal” power supplies were barrel adapter versions that I could change the tips out on. Along with an adjustable DC power supply. But these were so much smaller I ended up making dedicated versions with these for each of the laptops I have. I could make a 15v barrel jack...

The fit’s very nice. I’m not home right now but I feel like the extruding part is nearly flush with the back of the case.

The full size SD card for the BlueSCSI v2 is much easier to retrieve. Also, I use a microSD card and an adapter, so if something were to put pressure on it and have it break, hopefully it would be the adapter and not the card itself. I’ve broken 2 microSD cards trying to get them out of the...

Yes, I posted as a remix to @PotatoFi 's version on Printables: https://www.printables.com/model/1173988-usb-pd-trigger-card-case

If I had to guess, they are having a shortage of that print material and it isn't that it is sold out. Likely their daily capacity is set to zero. That is what I ran into when they were trying to phase out JLC black resin. Unfortunately, I just had to keep trying to submit payment until they...

I've found that JLCPCB actually does do somethings like that. When I was trying to print my Lisa mouse with the Lisa logo, I went back and forth with their engineers to get it in a printable state. I guess when I combined the parts in TinkerCad, the logo was floating above the mouse. They...

I used the Printable model (although I combined the two pieces myself in TinkerCad, so the combined version @Dave928 used should be very similar to mine in terms of fit. It will be interesting to see if the clear resin print from PCBWay is a better fit. From my measurements, they seem to be...

So, I just tried to measure my resin print with my cheap calipers and the round hole seems to be pretty much spot on at 6.0mm. Which is the same measurement I get on my original. I wonder if there's something else about the clear resin that is causing it not to go on (surface tension /...

I measured and the only difference in depth between the resin part and the original was that the original has a deeper hole in the center. But as your printed version doesn't have that and still sits flush, I don't think that is the problem (and the fact that the arm the knob sits on doesn't...

OK, so the package arrived this afternoon. They look pretty good - certainly not perfectly clear (I think JLC3DP may not do as good of a job with the oil coating or sanding in crevices - which is understandable). But I think it is a worthwhile upgrade if you really want to maximize the...

I've had oddities like this in multiple prints at JLC3DP and I've just accepted the risk and never had uses with the outcome. I'm sure there is some risk that the model is not correct, but I'm guessing that would be fine to print.

There's definitely issues with the model that some slicers do not like. I tried to clean it up a bit and got better results with this STL from JLC3DP: EDIT: OOF - looks like @caver01 beat me to it and his export is likely better than my recreation. His looks good in JPC3DP's analysis tool as...

Sorry if I missed that in the thread. I'll add you to the list. Also, I'll use your new improved. version for the next order, assuming the results of my test print are good.

We're only at 8 at the moment, and if my first 2 work out, I'll have 14, so we should be fine.

I think I may still be able to do it for a reasonable cost. I'll mainly wanted to wait to see if the fit works before ordering more. Right now, if the part I merged works, I can order 12 and still get the cheaper <$4 shipping. The total for 12 would be a bit under $3 per knob, shipped to me...

If you want to wait a couple of days to place that order, I can give a report on the resin knob. Mine might be arriving today. For some reason, my knob order got held up a bit longer in shipping. However, look what did arrive today! This is definitely my biggest / thickest print in...

I have a clear resin version on the way. I combined your two parts because they seem to be able to produce complex parts that normally would require tons of support on FDM printers. It should be here this weekend or early next week and I'll post the results.

Good point, probably could get away with 4 cores. I think I ordered so match the original cable (or maybe the s-video cable that likely had the shielding connected. I didn't solder that 5th wire to the shielding of the other ADB connector in the keyboard though, because I like having it...

Can you share the STLs for the parts? I’m curious why the shipping was so high? I wonder if it’s because I have mostly only done small parts that can ship easily.