Search results

I received the resin print of my adapted version shown above, which was designed to accommodate the variant of the A9M0050 mouse that has a slightly larger PCB and it seems like it will work fine for both versions. I say "seems" because I can't be sure because I technically cut up the PCB on my...

Looks like your link got truncated.

Which ones would you need? I think I have parts to make some more. I've also started using resin prints from JLC3DP and the finish is nearly professional level. Certainly better than what I can produce with my poorly tuned Ender. I went with the closest without going over for my...

Yeah, my chip didn't look too bad but when I removed it, the legs fell off at the base, making me think the corrosion was worse inside than what I could see. The good news is they are cheap and easily available.

First, I'd recommend changing the title of the post to give people an idea of what you are looking for help with. I saw you post and went to look into my notes to get help, and when I came back, I initially couldn't find you post because the title "Just count on it" didn't provide me context...

Surprisingly, it is not possible to do. I was able to use a Gerber to SVG online tool to make an SVG, and import it into TinkerCAD, but the scale wasn't preserved, so I had to scale it in a way that looked roughly correct. I made a DIY version of your PCB with holes by drilling my own, and it...

Interesting. I didn't think that to try the reboot with the disk image loaded. I always would reset the ESprofile to get back to the selector image. But I'm glad it's not only me, and that there is an easy workaround. Let me know if there's anything I can do to help. I know I still owe...

So I spent some time this morning with it. I created a new 5MB blank disk image. I then used my FloppyEmu to perform a fresh LisaOS 3.1 install. And it worked great. I installed all the apps. However, when I reset the ESProfile and select the newly created and freshly installed LOS3.1 image...

I have what I suspect is a bad PSU with one of my Molar Macs. Not sure the state of the analog board / flyback, but I need to disassemble it again to dig in. I'd love some more info on these to troubleshoot the power supply. Where did you measure the 12/5v voltages?

I still haven't had a chance to try a clean instal to a new image from floppies. I'll test that out this weekend. Is there a way to check the ROM on the parallel card? Worst case if it does turn out to be a difference in parallel interface card ROMs, and you need one to test, I'm just up...

I've had some discussions with the creator of the ESProfile (@AlexTheCat123 ) and it seems there was a potential issue with speeds when using the external version with the parallel interface card. I tried the new firmware and I still get an issue booting the external one from my Lisa. the...

I also wondered if you could make it more transparent with some sort of solvent. Might be cool to go more clear.

I wondered about this as well, but was too nervous to try. Let me know if you do it. My translucent area was yellowed, but it stands out less against the black than I thought, so I left it. But bondi blue might be pretty cool.

I expect the profits to be easily distributed with pennies (maybe even quarters). If you want your payout in the form of a produced adapter, send me the address and I would gladly whip you a couple adapters for you help! I've gotten pretty good at assembly and I bought the PCBs in bulk, so I...

OK, the first "professionally" printed cases came back from JLC3DP and they fit really well. I was worried that variations in my printer and small tolerances of the parts may mean that my 3d models work well only on my 3d printer with the filament I use. But, the resin prints from JLC3DP...

Yeah, I need to see if there's a way to get the shipping costs to be more reasonable. nearly half the cost was in the shipping of the small, lightweight shell. If you have links to the STLs, I can try to get them "JLC3DP compliant". I learned this the somewhat hard way with the Lisa Logo on...

Hey, first of all, thanks so much for this solution! A cheap solution for a Lisa HD emulator is awesome, and your guide to ordering the PCB with parts pre-assembled was fantastic. My case isn't quite as awesome as @JustDaveIII's, but I hopefully can keep refining it to make it better. You...

Yeah, I have a ReactiveMicro Drive/Turbo. I’d love to hear more about the overlap and differences between all these devices. Looking into the FujiNet, it seems like a more capable and less expensive alternative that maybe I should have picked up for my IIgs.

Yes, you are correct that the one on the left was from PCB way. You can really see the difference in clarity when I put it over the paper with printing on it. But I do agree with you that when quality is a concern, it seems like there’s a drastic difference. I may need to look into...

I had two of my four Mac IIc* machines have bad speakers. And the speakers in them are off, rectangular shaped speakers. I also had a bad speaker in my Mac II (which made me think for the longest time I wasn't getting a boot chime or sad Mac chimes) and found a decent replacement on Amazon. I...