Search results

Thanks To Will at CayMac my reloaded SE now is working but its been some journey. A great read for anyone contemplating tackling a reloaded board with limited experience, as the saying goes "not for the faint hearted"

HI everyone I have a Plus board that boots and the mouse works but not the keyboard. So far I have - sounded the tracks from the keyboard socket to the TSG and the SCC(6522) and they are all good Sounded through a keyboard cable as above tried 2 known working keyboards socketed and replaced the...

I did sort this with a recapped power supply and replaced the ADB chip. It's still working perfectly.

Bluescsi maybe

I've gone with this, very pleased. https://github.com/dekuNukem/PicoRC/blob/master/mac_se_se30.md#pre-flight-checks

In the photo it looks like you may have a solder bridge on Q10. Also some solder balls to remove

If anyone would like to have a go at fixing this please let me know. I've also posted this on Discord. Cheers

I don't know if the SCSI chip is any good from the donor as most of the other chips have been no good, it must have been over voltaged at some time as the rom and iwm were cactus. The adb glue and bbu were from another board so hopefully they are good. I purchased as many new as possible to try...

The 65c22n in the correct socket should be OK as it was a new one.

I put the correct chip in place of the wrong one and I too was concerned as to what else may have been damaged. I replaced the Ram with tested ram even though it was OK. Replaced the BBU as it was causing boot errors in test board. Checked board for solder bridges. So I now have a new 65c22 in...

Is the BBU in a Classic II board the same as the SE?

Unfortunately still stuck here!

Thanks for that but no change. Changing the ram gets me vertical bars.

Here is what I get on SE reloaded? RAM related ?

Well done nice job for a first attempt

Has anyone else from the bulk buy successfully completed their board?

Hi bluescsi should just work, are you sure its actually OK? have you removed the dead Quantum drive?

Hi I've a similar problem no sound from speaker but sound from the headphone jack. The speaker works checked on another LC

You may need to look at networking rather than usb down the track.

Yesterdays heroes