Assemble a TransWarp GS CPU cable?

@GamesMissed

New Tinkerer
Mar 28, 2025
16
1
3
gamesthatimissed.com
Does anyone know the wiring for the CPU ribbon cable that connects a TransWarp GS card to the original CPU socket on a IIgs mainboard? It's a 40-pin connection on the TransWarp card, I'm just wondering whether there's a published diagram for insertion into the DIP socket at the other end. Wouldn't want to wire up anything wrong.
 

ClassicHasClass

Tinkerer
Aug 30, 2022
358
207
43
www.floodgap.com
Here is how it looks in my IIgs. Does this help you at all?
 

Attachments

  • PXL_20201126_231135825.jpg
    PXL_20201126_231135825.jpg
    565.1 KB · Views: 35

NJRoadfan

New Tinkerer
Feb 6, 2022
57
17
8
The pinout of that cable is weird. The Bill Shuff cable I have has all pairs twisted (reversed) at the TWGS end of the cable. The pinout is not 1:1 between the card and CPU socket if you directly crimp on the IDC-40 plug.
 

iigs123

New Tinkerer
Oct 13, 2025
12
5
3
If you don't want to try to make it, you can buy it from ReactiveMicro:
 

@GamesMissed

New Tinkerer
Mar 28, 2025
16
1
3
gamesthatimissed.com
Thank you, all. I was hoping it was relatively straightforward (well, as straightforward as a IIgs processor upgrade card might be). So far, I've been looking at this page, mapping the pinout of the processor socket on the TransWarp GS card to the 40-pin socket for the cable to connect to the IIgs logic board, and then at the Western Design Center datasheet for the processor line. It feels like all of this together should be enough to build the cable. I'll post of any further progress.