Beige PowerPC G3 - IDE HardDrive Replacment?
- Thread starter Peter-Erik
- Start date
-
Hey Guest, MARCHintosh 2026 is upon us. Check out community projects, join GlobalTalk, and have fun!
I replaced mine with a 120Gb drive I got off of EBay, I imagine one of those IDE to SD card solutions could work too. If you want to, you can also use the internal SCSI connection and install a "BlueSCSI" or "SCSI2SD" depending on what you want to try.
You mean like this? https://www.amazon.nl/-/en/Adapter-3-5in-SDHC-Memory-40Pin/dp/B0C3ZLNW69
(i don't seem master slave option)
(i don't seem master slave option)
That should work. If there is no Master/Slave jumper, you may have to play around with the assumption that it could be default master, or possibly Cable Select. You may have to change your optical drive jumpters (assuming you have one) to get this to work on the same chain.
Here is a review on it.
Be aware that the Beige G3 can boot only from partitions in the first 8GB of the IDE drive due firmware limitations.
I've had good luck with 64GB 44-pin IDE flash modules in my G3s.
I've had good luck with 64GB 44-pin IDE flash modules in my G3s.