LCII - static display issue

[roymaya]

I'm having an issue with an LCII. The unit was dead so I went ahead and recapped it. It starts now but I'm getting this static weirdness on the display. Anyone have any ideas what the issue could be?

 

[David Cook]

Check for capacitor damage around C2. There are a lot of traces related to the CLUTDAC (UJ10) that run nearby. See sheet 5 of 5 on the schematic.

 

[Retronaut]

Check also if the caps themselves for the video area are intact, could be a damaged trace in that area, as it has been re-capped, it does indicate rather that a damaged trace is the issue.