Search results

I did this for 8.6 with the Radeon 7000 drivers way back when. IIRC, the R7000 came out after OS 9 was out, so they never had "official" support for 8.6 and earlier, but it largely worked just fine. It just wasn't "officially" supported.

I bought several of the Orico 128 and 256 MSATA drives while they were on sale. I tested them last weekend to see if I had any failures before return dates expire. I was testing on a Windows machine and I'm no expert on disk formatting/initializing preparation, but perhaps someone can make...

I went looking for where -5V is actually used some time ago, and couldn't find anywhere. It was not a deep search and I was focusing on X500 (7500/8500/9500) machines at the time. As far as I could tell, the ATX conversion articles at xlr8yourmac.com (have to use Wayback) don't list -5 as...

Yes. I felt like I was wrong there, but couldn't remember where I was going wrong. AIX, I think was what the ANS ran. Anyway, yes, I meant A/UX.

Unfortunately, in Mac OS, Apple never took advantage of the IOPs on the ports. There's a pass-through software path that ignores the IOPs and just goes direct to the serial and SCSI chips, etc. and that's what the Mac OS uses. Supposedly, AIX had support for the IOPs.

Some old articles/websites I had bookmarked regarding the original Apple TV: https://arstechnica.com/gadgets/2011/08/how-to-put-boxee-or-xbmc-on-your-original-apple-tv/#comments-bar Scott Davilla developed tools: ATV USB Creator Tool ATV Bootloader Crystal HD for OSX Not particularly...

I don't know if it affects your situation, but I'll throw out that the IIfx has faster DRAM access, at least for writes, because it buffers the Write operations immediately to free up the CPU to continue about its business. That wouldn't explain a discrepancy between IIci and SE/30 results...

Mike had a lot of good articles on his site over the years, which are no longer available. I wonder if he would give permission for them to be hosted here? The forums he ran are probably gone forever. There was so much expertise at the time shared there. Sigh.

Definitely. That was about the same time frame when I lucked into a free IIfx on Craigslist. I needed it for my 16 MB RAM SIMM project at the time, which worked out pretty well. Has anyone ever figured out what the jumpers on the IIfx logic board do? As far as I can tell, the computer...

Could also be an oxidized/dirty SCSI connector and unplugging/plugging things cleaned it off enough to start working. We've seen a few folks here have SCSI problems caused just by the connector being old and using something like de-oxit fixed it up.

Sorry about that. I meant to include the link in the original posting, but it looks like TDNC covered it. I'm not sure why you would for a Cube, but if you want something larger, there's a KingSpec 1TB mSATA for ~$60 until 04/06...

Orico (edited) brand 128MB MSATA SSD on sale at Newegg for $10 through 4/01/23. I've never tried it myself. Limit 1 to customer. This adapter is pricey, but has an actual jumper for setting Master/Slave/CS: https://www.amazon.com/dp/B017VQT5YW/?coliid=I1MVZPP46HRRUG For adapters which...

I was away for a while. The 6400/6500 actually isn't my specialty. The above referenced thread is probably the best reference. I did extensive testing of PCI-PCI Bridges in the Umax S900 clone and can talk about the problems and exceptions at length, but that's not very helpful to someone...

Just following up for the sake of completeness... The Cypress Cypress CY3670 programmer with CY3095 adapter showed up on Ebay for $25 + shipping. Needless to say, I bought it immediately. I haven't tested it yet though. It looks pristine, although the pins for one of the sockets got...

You might also check (IIRC) Phoenix Connectors. I don't have the link available at the moment and may be mis-remembering the name, but Google will probably get you there. Later Edit: This posting https://tinkerdifferent.com/threads/macintosh-connector-part-numbers.135/ lists the...

My 13-year-old water heater just (late Dec.) blew its drain valve clean out. Happily, the garage drains well. Temporarily took out the adjacent furnace the day before temperatures plunged to 15 degress F. Looking at my records, the previous water heater lasted about 13 years also. I think...

Thank you for that, @Kai Robinson While reading Part 1 I kept wondering why the author and his predecessor didn't use the Serial pins on the ATTiny. Heh, then I read Part 2. :)

You can use 100 uF/10V which is pretty commonly available and removes the uncertainty about 6V vs. 6.3V.

I keep a box of modeling clay in a zip lock bag next to my soldering station because of the type of problem you had. The same thing happened to me the first time I used hot air to desolder. Now days, I roll little snakes of modeling clay and press them on rows of surrounding components that...

72-pin SIMM on 128K <=> Plus doesn't make as much sense as on SE/30, because memory usage on the 128K/Plus is only 16 bits wide and 72 pin SIMM is 32 bits wide. It would make more sense to just populate with fewer, higher density chips, assuming the refresh circuitry is compatible. Four 2M X...