Search results

Are you reapplying grain in Topaz, as this are pretty nice / gentle enhancements. Can you share your settings?

But I noticing, V7.6 doesn't want to go below Qp 20. Looking into that. It is Type A bug, only.

Bit-rate is depended on the Qp value. Lower Qp, higher bit-rates. If you values below 22, you adding risk of capture failures. Rare now, but it can happen.

The code can go to 400 in preview, but this might be bug. Use the histogram to judge the exposure.

see https://tinkerdifferent.com/threads/hacking-the-kodak-reels-8mm-film-digitizer-new-thread.4885/page-2#post-42788

Adjust using the Picture settings first, increasing the White Bal to 2.0. If still too blue, start the capture, then adjust the third parameter from 256, downward, until it looks okay.

Correct. The range of film means the ISO needs to vary. The algorithm will aim for the lowest practical for the film's density.

Release V7.6 This adds info reporting the sensor read-out resolution, but leaves the encoding resolution at 1600x1200 for now. This is info is during preview only. There is also the window offset, the number of x, y pixels from top left of the active sensor region. This could be useful for...

Print your own if you can https://www.stlfinder.com/model/super8-to-normal-reel-adapter-ovQWakM0/2572373

Framing is likely working after the reboot.

That is not the adaptor. The red and grey posts are just classic 8mm style reel hubs. You need to attached this over the red post:

Now for something not really firmware related, sensor read-out noise. Turns out the Reels has a lot of it. Any double-Es out there want to see if this can be improved? On my darkest footage I would sometime notice chroma artifacts at the top and bottom of the image. I was thinking it was the...

Oopps, I had the red offset wrong: Default values should be: WBAL (current defaults) 2.0 592,256,256 1.5 560,256,256 1.0 528,256,256 0.5 496,256,256 0.0 464,256,256 -0.5 464,256,288 -1.0 432,256,320 -1.5 304,256,448 -2.0 256,256,448

It will not. Only the AZURE-1228MAC 2/3" 12mm F2.8. The lenses need to be designed as a macro.

My three units.

That is the older design, use the STLs linked in https://tinkerdifferent.com/threads...-film-digitizer-firmware-hack.2897/post-42590

I would replace that unit.

1) stick with the the known lens 12mm at 2.8mm. I have three units running 2.8mm all work great. Use: https://www.rmaelectronics.com/azure-photonics-azure-1228mac/ 2) Latest 3D spacers: https://tinkerdifferent.com/threads/modding-the-kodak-reels-8mm-film-digitizer-firmware-hack.2897/post-42590...

Why did twenty people (so far) download NewNtkTools2025.zip, this is for developers to "customize firmware". I was just sharing a change to one the tools I'm using, I only expected maybe Mac84, and one other to try it. If there are more out there want to try extending the firmware, let me know...

The Picture setting still set the white balance like before, with has a maximum of 9 WB settings. Now during recording you can tweak red, green and blue, up and down as much as you like, it will remember any changes. Unfortunately I yet to implement a reset, to restore the defaults. The...