Search results

I put the correct chip in place of the wrong one and I too was concerned as to what else may have been damaged. I replaced the Ram with tested ram even though it was OK. Replaced the BBU as it was causing boot errors in test board. Checked board for solder bridges. So I now have a new 65c22 in...

Is the BBU in a Classic II board the same as the SE?

Unfortunately still stuck here!

Thanks for that but no change. Changing the ram gets me vertical bars.

Here is what I get on SE reloaded? RAM related ?

Well done nice job for a first attempt

Has anyone else from the bulk buy successfully completed their board?

Hi bluescsi should just work, are you sure its actually OK? have you removed the dead Quantum drive?

Hi I've a similar problem no sound from speaker but sound from the headphone jack. The speaker works checked on another LC

You may need to look at networking rather than usb down the track.

Yesterdays heroes

Thanks for reply I just fixed it by trying again maybe I had wrong buttons with my fat fingers?

Hi Just tried to update firmware on my floppy EMU to latest and am getting "Firmware Warning , Please install firmware Part 2, Expected CPLD Ver 16 Actual CPLD Ver 15." Anyone Know how to fix

I use rdmark Debian release from github. Has smb and appletalk server so you can access it from a new iMac which you can use to download software from the net and then copy to debian server which you can access from your older macs via appletak. Works great as you have a repository for all you...

Has any one used a PLA + filament that they can recommend? Thanks

I usually shake dry then hit it with ipa to expel water and leave in a warm place for at least 24 hours. This method has worked so far

Nice paint finish on the floor

I think my SE/30 is in similar territory. Chimes and boots(can see bluescsi flashing) . Originally no screen but I've removed and cleaned UE8 LS166 and UF8 LS393 both had cap goo under and now I get what is shown in pics. What to check next?

Problem found thanks to an eagle eyed helper on another site. C8 was reversed. Thanks to all

I have a recapped LCIII that has been working well. It has just started to reboot itself just after it has booted into the desktop and a couple of times has locked and rebooted during startup. I've done all the usual swaps of known good memory drive and power supply from another working LCIII...