Search results

I just did a cursory search for pantone 405nm resins and I regret to say there were zero relevant results. I would definitely be interested to hear if anyone else has more information.

There's loads of information online but I feel very confident that this article is reliable summary to address Error codes 21, 22, and 27. The included URL is a good general reference for FDS errors and basic prep. How do I know this is a good article? I can consistently create and...

Have you ever confirmed the Macs port? After that - have you confirmed power is making it to the keyboard side when it’s plugged in? IIRC the outer pins are GND and 5v. Inner two are clock and data. if you have an oscilloscope or logic analyzer it’s trivial to probe clock and data on the...

From two known-good analog boards (in-situ): "TAI-HO TH1565" flyback on a 630-0102 Analog Board 1 to 3 = 0.4 Ω 2 to 4 = 0.8 Ω 5 to 7 = 4.3 Ω 5 to 8 = 1.4 Ω 1 + 4 = .9 Ω 1 + 5 = O.L. 2 + 3 = .7 Ω 2 + 7 = 17.56K Ω 2 + 8 = 4M Ω (some fluctuation) 3 + 7 = 93K Ω (some fluctuation) 3 + 8 = 3.5M Ω...

For the record, I finally found a 128k in excellent condition at an excellent price. I don't think there is anything else I really want to get in the mac world (y)

They're 3D printed by @Kay K.M.Mods. Extremely high quality! My Shapeways gears (regular) (premium) are a decent alternative if MacEffects is out of stock. Kay's gears higher quality as demonstrated in this thread. Dozens (possibly even hundreds at this point) of people have used my gear and...

I was lucky and could submit a few prototypes to JLC before they enforced minimum PCB size guidelines. I used the thinnest board and made "tongs" that came down to touch the sides of the legs, held in place with a 3D printed frame. My results weren't promising but perhaps there is a better...

I made a CloneyClip, but it's sort of a pain in the butt.

Nah, that’s the expansion slot that’s empty. It’s typically empty (expansions are sort of rare). The ROM is present but “camouflages” in with the rest of the board … if you’re not looking closely enough like me!

Sorry dude, I guess my "we don't talk about bruno" joke was a dud.

We don't talk about iPad Macs, no no no 🎶 🎶 🎶

Here's an example of the Электроника Б6-03 — Elektronika B6-03 Digital LCD watch. This particular model, among three others, has arrived from Ukraine. It's the first of the three I've purchased which was in good enough condition to bring back to life. The other two were "battery bombed"...

I have a brief article on the RGBtoHDMI in our resources section. Make sure to check out the update for a sample profile.

That's really cool!

It ain’t much but it’s honest work. (I made an ugly clock)

And I would have got it too if it wasn't for that meddling JDW!

If it's an endeavor you're willing to undertake... a copper shim with thermal paste will be significantly more performant than a heat pad.

maybe try booting with no expansion RAM and the. Half of the RAM - and switch the sticks for the other half. You may need to change jumper settings to support none / half ram. edit: I’m on mobile, about to head out so my message is a bit short -

I've seen this boot loop on two separate machines when the 12v line was too low. A wash and a recap (analog board) brought them back to life!

I'm unreasonably excited to see these things in action — looking forward to more photos! 🤓