I'm back!
melw, your type-D firmware from #695 is running well on our H2825.
A few things for anyone else doing this with an H2825:
No freezing so far and I've done a reel and a half. Thank you Hook Line and Tinker and melw!!
A still from a dark Kodak Tri-X B&W scan:
BEFORE (I believe this was set to -1.0 exposure, -2.0 sharpness, not sure of the tint, it seems to be reduced. If you've adjusted your image settings, I recommend before updating your firmware making a note of what they were):
AFTER (-0.5 exposure, -2.0 sharpness, 0 tint):
melw, your type-D firmware from #695 is running well on our H2825.
A few things for anyone else doing this with an H2825:
- Standard install worked first try! (FAT32 with FWDV280.BIN in the root, with an empty NVTDELFW folder for good luck)
- The 32 GB limit: For the first run I tried a 128 GB Lexar V30 and it stalled within a few minutes every time (CARD STALLED / AUTO-STOPPED / FILE SAVED) but everything was saved automatically and the same reel on a 32 GB card ran fine.
- Film jammed partway through one reel, so auto-stop was triggered and saved the file
No freezing so far and I've done a reel and a half. Thank you Hook Line and Tinker and melw!!
A still from a dark Kodak Tri-X B&W scan:
BEFORE (I believe this was set to -1.0 exposure, -2.0 sharpness, not sure of the tint, it seems to be reduced. If you've adjusted your image settings, I recommend before updating your firmware making a note of what they were):
AFTER (-0.5 exposure, -2.0 sharpness, 0 tint):
Last edited: